Thompson's Water Seal uses a unique micro silicone emulsion to stop water penetration. Apply Water Seal directly onto damp surfaces to provide long lasting waterproof protection within hours.
Water Seal
Apply directly to damp surfaces
Stops freeze thaw damage
Use on brick, concrete and stone
Suitable for use on:
brick, stone and plaster
Stockists near you
Weather forecast
Please share your location to receive an accurate weather forecast
Today
Tomorrow
Come rain or shine, Thompson's got it covered
Drying Time
2 HOURS
when the 1st coat has soaked in, you can get on with the 2nd
Coverage
4m2 / litre
Sizes
Colours
Coverage
4m2 / litre
Sizes
Colours
Give the surface a decent scrub with a stiff bristle brush. Fill any cracks and do pointing repairs, if needed.
Give the tin a good shake. Apply using a brush or roller. If you're tackling a wall, work in 1m sections from the bottom upwards. Once an area is fully saturated move onto the next section. Don't forget to give those mortar lines a soaking too. Make sure you treat the whole wall and not just isolated areas.
As soon as the first coat has soaked in, you can crack on with the second coat
Clean your equipment in warm water and detergent