Quick Drying Drive Seal revives old tarmac fast. It protects drives from oil stains and is ready for vehicle traffic after just 4 hours.
Quick Drying Drive Seal revives old tarmac fast. It protects drives from oil stains and is ready for vehicle traffic after just 4 hours.
Drive over in 4 hours
Resists oil and fuel stains
Slip Resistant
Suitable for use on:
Sound tarmac
Please share your location to receive an accurate weather forecast
Today
Tomorrow
Come rain or shine, Thompson's got it covered
Drying time
4 hours
wait 4 hours before putting on a 2nd coat
Give the tarmac a scrub with a stiff bristle brush to remove any dust, dirt or moss. Use Thompson's Oil & Drive Cleaner to give the tarmac a good clean. For any exisiting oil or grease stains, use this neat.
Fill any holes with fresh concrete or cold cure tarmac, if needed.
Make sure any cleaners are rinsed off the tarmac and its dry before you start to apply Quick Drying Drive Seal.
On cold & damp days, drying and re-coat times will take longer.
For best results, use on a dry day above 10C. Give the tin a really good stir before and during use.
Use a long pile roller and tray for this job. Pour the paint into the roller tray and fully load your roller. Keep on stirring the paint during use.
Paint from the furthest point so you can get back into your house & don't paint yourself into a corner!
Wait 4 hours before putting on a second coat.
Clean your equipment with warm water and detergent.