Oil stain? Tackle it with Thompson’s

Oil stains on driveways and garage floors are a common headache. Whether it’s from a leaky car, home projects or power tools, those greasy marks can soak deep into concrete over time, making them hard to shift.

The good news? With the right products and a straightforward approach, you can remove stains and protect the driveway from future damage. Thompson’s offers a complete, easy-to-use system designed to clean, seal and protect driveway surfaces.

Step 1: Clean oil stains with Thompson’s Oil and Drive Cleaner

If you need a reliable way to remove oil from driveways or garage floors, start here. Thompson’s Oil and Drive Cleaner is specially formulated for use on concrete, tarmac and stone surfaces. It penetrates deep to lift oil, grease and grime, all without damaging the surface underneath.

First, sweep away loose dirt and debris. For stubborn stains, apply the cleaner directly onto the stain and work it in with a stiff brush. Let it sit for a few minutes so it can do the hard work, then rinse thoroughly with clean water and allow the surface to dry.

For general cleaning, it’s as easy as pouring 1 litre of cleaner into a 5 litre bucket and filling up the bucket with water. Then use a stiff bristle brush to clean the whole area.

Step 2 (for tarmac driveways): Protect with Quick Drying Drive Seal

Once the driveway is clean and dry, it’s time to keep it that way. Thompson’s Quick Drying Drive Seal forms a durable, water-resistant layer that helps protect surfaces from oil, petrol, water and everyday wear.

It’s simple to apply using a brush or roller. Just remember to wait four hours before putting on a second coat. The fast-drying formula means your drive is ready for light use in just a few hours. The finish looks clean and natural, not shiny or plastic-like. Best of all, by sealing your surface now, you’re making future stains easier to clean and helping extend the life of your driveway.

Step 2 (for concrete driveways): Finish with One Coat Concrete Seal

For longer-term protection, apply Thompson’s One Coat Concrete Seal. It’s ideal for more than just driveways - use it on garage floors, patios and other exposed concrete areas around a home. Once sealed, these surfaces will stay cleaner for longer and be easier to maintain, as this invisible barrier protects against oil, water and general wear and tear, all without changing the look of your floor.

Best of all, you only need one coat, making it a quick, effective solution for long-term protection.

The easy way to deal with oil stains

Oil stains don’t have to be permanent. With Thompson’s simple two-step system, you can clean and protect a driveway with minimal effort - no specialist tools or experience required. 

So, next time you see an oil mark on the drive or garage floor, don’t ignore it. Tackle it with Thompson’s and keep your surfaces looking clean, sealed and ready for whatever comes next.