Patio & Block Paving Seal protects and seals patios from the weather in just one hour. The powerful formula will also resist algae growth and protect against oil and fuel spills.
Patio & Block Paving Seal
Resists algae growth
Resists oil and fuel stains
For use on all block paving and flag stones
Suitable for use on:
Granite, limestone & sandstone block paving & flag stones
Stockists near you
Weather forecast
Please share your location to receive an accurate weather forecast
Today
Tomorrow
Come rain or shine, Thompson's got it covered
Drying Time
1 hour
wait 4 hours before putting on another coat
Coverage
6m2 / litre
Sizes
Colours
Coverage
6m2 / litre
Sizes
Colours
Make sure block paving, jointing sand and paving slabs are dry before you start.
Give the surface a decent scrub with a stiff bristle brush to remove any dust or dirt. If you have any mould or algae, use some Thompson's Advanced Patio & Block Paving Cleaner.If you've got oil stains, use Thompson's Oil & Drive Cleaner.
Make sure any cleaners are rinsed off the patio & it's dry before you start applying the Patio & Block Paving Seal.
For best results, use on a dry day above 10C. On cold & damp days, drying and re-coat times will take longer. Give the tin a good shake. Pour the tin into a roller tray and use a long pile roller to apply in long smooth strokes. On textured block paving, make sure any puddles are spread into dry areas.
Wait 4 hours before putting on another coat.
FYI - Really rough surfaces might need an extra coat.
Clean your equipment with white spirit.