One Coat Patio & Block Paving Seal

One Coat Patio & Block Paving Seal protects and seals patios from the weather in just one coat. The powerful formula will also resist algae growth and protect against oil and fuel spills. 

One Coat Patio & Block Paving Seal 5Ltr_330px

Resists oil and fuel stains

Drive on after 24 hours

Easy to clean

For use on all block paving and flag stones

Suitable for use on:

Granite, limestone & sandstone block paving & flag stones

Stockists near you

Weather forecast

Please share your location to receive an accurate weather forecast

Today

Tomorrow

Come rain or shine, Thompson's got it covered

Drying Time

1 hour

Coverage

6m2 / litre

Sizes

5L

Colours

Clear

Coverage

6m2 / litre

Sizes

5L

Colours

Clear

Make sure block paving, jointing sand and paving slabs are dry before you start. Give the surface a decent scrub with a stiff bristle brush to remove any dust or dirt. If you have any mould or algae, use some Thompson's Advanced Patio & Block Paving Cleaner. If you've got oil stains, use Thompson's Oil & Drive Cleaner.

Make sure any cleaners are rinsed off the patio & it's dry before you start applying One Coat Patio & Block Paving Seal.

For best results, use on a dry day above 10C. On cold & damp days, drying and re-coat times will take longer. Give the tin a good shake. Pour the tin into a roller tray and use a long pile roller to apply in long smooth strokes. On textured block paving, make sure any puddles are spread into dry areas.

It's just one coat, so that's it, job done!

FYI - Really rough surfaces might need an extra coat.

Clean your equipment with white spirit.