Non Slip Tile Adhesive

Our Non-Slip Tile Adhesive is a contract grade acrylic tile adhesive ideal for use in bathrooms, showers and kitchens.


Conforms to BS EN 12004 D2T

Thompsons-Non-Slip-Tile-Adhesive-15kg

Contract grade acrylic tile adhesive

Excellent grab properties and high bond strength

Mould Resistant

Suitable for use with:

Showers, Bathrooms and KitchenS

Mix Ratio - 0.8m2 per kg when using a notched trowel

Number of Tiles - 32 15cm x 15cm tiles*

* Tiles per kilogram

Stockists near you

Weather forecast

Please share your location to receive an accurate weather forecast

Today

Tomorrow

Come rain or shine, Thompson's got it covered

Drying Time

20 MINUTES

ALLOW 24 HOURS BEFORE GROUTING / 48 HOURS BEFORE GROUTING NON-POROUS SURFACES

Sizes

3 75KG_7 5KG_15KG

Coverage

m2 / litre

Sizes

3 75KG_7 5KG_15KG

Colours

Surfaces to be tiled must be sound, clean, dry and free from any contamination which might impair the adhesive bond

Very porous or dusty surfaces and polished plaster should be sealed with a coat of Thompson’s Universal PVA before application. This should be fully dry before application

Existing glazed tiled surfaces should be roughened with an abrasive disc before application

Working time is approximately 20 minutes

Using a notched spreader apply the adhesive to cover an area of approximately 1m²

Bed the tiles into the adhesive using a twisting action to ensure complete contact between the tiles and the adhesive. The spotting method of fixing should not be used

If required, insert plastic spacers between tiles to allow at least 2mm wide grout lines.

Remove any excess adhesive from the tiles with a damp cloth

Allow the tiles to settle for 24 hours (48 hours if tiling on non-porous surfaces) before grouting

When using a notched trowell, coverage is approximately 0.8m² per kilogram. 1kg of Thompson’s Non Slip Tile Adhesive will fix approximately 32 15cm x 15cm tiles

Clean any excess adhesive from the surface with a damp cloth within 20 minutes

Tools and any excess or spilt adhesive should be cleaned with water before it dries