Aluminium Solar Paint

Aluminium Solar Paint leaves a bright, silvery finish to roofs. Its heat reflective finish will prolong the life of the roof coating

Aluminium Solar Paint 5L

Light & heat reflective paint

Prolongs the life of bitumen coatings

Dries to a bright silver finish

Suitable for use on:

ALL ROOFING MATERIAl

Stockists near you

Weather forecast

Please share your location to receive an accurate weather forecast

Today

Tomorrow

Come rain or shine, Thompson's got it covered

Drying Time

Weather dependent - up to 24 hours

Coverage

10m2 / litre

Sizes

5L_25L

Colours

Silver

Coverage

10m2 / litre

Sizes

5L_25L

Colours

Silver

Surfaces must be clean, dry and free from dust and debris

Existing Bitumen coatings should be allowed to weather for at least 10 days before application of Thompson’s Aluminium Solar Paint

Stir thoroughly before use.

The appearance of a silver film on the surface of the paint after a brief period of stirring does not signify complete dispersion of the coating. Stir for several minutes to ensure complete dispersion.

Apply by brush or spray

  • If brush applied too thickly staining may occur.
  • Excessive brushing could cause the substrate to soften.

Ensure the first coat is fully dry before applying the second.

Staining can be caused if the paint comes into contact with moisture or rainfall before it has fully cured.

Tools should be cleaned with white spirit.

Minor spillages should be wiped off surfaces before the paint has dried

Major spillages should be mopped up immediately with sand and disposed of in accordance with regulations