Eco Chem Brick & Mortar Cleaner

Thompson's Ecochem Brick & Mortar Cleaner uses a fast acting, non hazardous formula to remove efflorescence, ingrained dirt, mortar and cement from brick, tiles, concrete and metal. 

Brick_Mortar_Cleaner_5L

Fast Acting

Doesn't contain any hydrochloric acid

Removes stains, limescale, efflorescence & dirt

Suitable for use on:

Brick, tiles, concrete and metal

Stockists near you

Weather forecast

Please share your location to receive an accurate weather forecast

Today

Tomorrow

Come rain or shine, Thompson's got it covered

Working Time

5 - 10 MINUTES

Coverage

m2 / litre

Sizes

Colours

For light staining dilute the cleaner; 1 part cleaner to 10 parts water.

For medium staining dilute the cleaner; 1 part cleaner to 5 parts water.

For heavy staining dilute the cleaner; 1 part cleaner to 1 part water, depending on level of staining.

Mix together in a plastic bucket. Do not mix with any other chemicals.

Make sure all porous surfaces are completely wet wih clean water before you apply the cleaner.

Take care when applying near decorative surfaces, and always test an inconspicuous area before applying our Ecochem Brick & Mortar Cleaner.

You can use a brush or a low pressure spray (avoid using a very fine mist) to apply this product.

Move from the top downwards and work in 1m sections. Ensure each area is fully saturated before moving on to the next section.

Leave to work for 5 to 10 minutes, then use cold clean water to give the surface a good scrub clean. DO NOT allow the product to dry in.

Clean up immediately after, and thoroughly rinse any spills or misapplied product.

Rinse wet porous surfaces after application, removing all traces of Thompson’s Ecochem Brick & Mortar Cleaner.

You can also use Thompson’s Ecochem Brick & Mortar Cleaner to clean brick laying tools.

Clean all equipment in warm water and detergent